Filter
Top Products
The CatCam is a surveillance system that creates a new channel
to add to existing television channels. The new channel carries a
picture from the camera that is placed anywhere in the home. The
CatCam was designed to install effortlessly into existing coax home
wiring or into new construction.
Contents: Channel Injector
Camera
Power Injector
Power Supply
Coax Jumper
The CatCam is comprised of a camera and a channel injector.
The camera is designed to flush mount indoors or outdoors using
a single gang J box. The channel injector is weather resistant and
designed to mount indoors or outdoors close to the incoming CATV
or antenna feed. The system uses the existing coax cable distribu-
tion in the house.
The CatCam was designed to work with Cat 5 wiring. Although the
system will function with quad wire, Cat 5 delivers the highest quality
picture. The Cat 5 allows the use of an automatic line length sensor
and picture compensator. Quad wire does not take advantage of
this enhancement.
Model Differences:
The model 9500HHR series is a high headroom design for CATV
and off air antenna feeds only. (5-806MHz)
The model 9500BID series is a bi-directional design for use with
CATV cable boxes that are interactive or require bi-directional com-
munications with the cable company. (5-42MHz return path)
The model 9510PAL is designed to modulate PAL frequencies and
use CATV or off air antenna feeds.
Installation:
First, locate the incoming CATV or antenna feed and install the
channel injector at that location.
Second, install the camera at the desired location and run Cat 5 wire
from the camera to the channel location.
Third, apply power and select an unused channel for the CatCam
picture to appear on all the televisions.
2
11
Multiplex Technology, Inc. warrants this product to be free from
defects in materials and workmanship for a period of one year from
the date of purchase or MTI will repair, or at its option, replace the
defective product. To obtain warranty service, call MTI for a return
material authorization (RMA) number and return the product pre-
paid to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, CA
92821, Attention: Customer Service. Please put the RMA number on
the outside of the carton.
Any implied warranty arising from the sale of the product including
implied warranties of merchantability and fitness for purpose are lim-
ited to the warranty stated above. MTI shall not be responsible for
losses or damages or expenses, whether direct, consequential or
incidental arising from the use of or the inability to use this product.
Some states do not allow limitations on how long the implied war-
ranty lasts or the exclusions or limitations or incidental or conse-
quential damages, so the above limitations and exclusions may not
apply to you. This warranty gives you specific legal rights, and you
may have other rights which may vary from state to state.
WARRANTY