Filter
Top Products
Power Length Requirements
Method One
Power Length Requirements
Method Two
Power Length Requirements
Method Three
7
Method Two: Use the power injector to apply power along the Cat
5 or quad wire run. Cut the connecting wire along the run and insert
the power injector. Connect the wires using the color coding. Then
plug the power supply into the power injector.
The green LED in the upper right corner of the channel injector will
be lit showing power is active.
Method Three: Apply power directly at the camera.
6
power injector
pin 1
blue/white
cut Cat 5 wire
power plug
power supply
-+
-+
cut the power
supply cord and
strip the wires
wire with the
white stripe
connects to the
(+) terminal
power supply
power supply with
end removed
Up to 300’ of
Cat 5 or quad wire
maximum for
the 9511 B&W.
Up to 100’ for the
9521 Color
power plug
power plug
Up to 100’ of
Cat 5 or quad
wire maximum
Up to 100’ of
Cat 5 or quad
wire maximum
Up to 300’ of
Cat 5 or quad wire
maximum for
the 9511 B&W.
Up to 100’ for the
9521 Color