Page 12 of 52 Scorpion™ GBC 2.0/RGY User Manual (Rev. 2 ML)
Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU>
Press to find an operation mode or
to back out of the current menu
<DOWN>
Press to scroll down the list of
options or to find a lower value
<UP>
Press to scroll up the list of options
or to find a higher value
<ENT>
Press to activate a menu option or a
selected value
Branches
The menu structures of the Scorpion™ GBC 2.0/RGY products have seven branches,
as follows:
• Auto/Sound (13 option)
• Laser Sky Color (4 options)
• Laser Sky Effect (1 option)
• Sound Sensitivity (10 options)
• DMX address (503 options)
• Slave (1 option)
• Reverse (2 options with two values each)
• The control panel will remember the last setting you programmed, even after you
have turned the product off.
• In addition, the control panel will remember the last selected option from each menu
Options on the
Current Menu
Branch
To change an option on the same menu branch, do the following:
1. Press <MENU> once (the LED display will blink).
2. Press <UP> or <DOWN> until the desired menu option shows on the LED
display.
3. Press <ENT> to accept the new option (the new option will show solid on the
Options on a
Different Menu
Branch
To change an option on a different menu branch, you must exit the current branch.
1. Press <MENU> once (the LED display will blink).
2. Press <MENU> repeatedly until seeing the active option of the desired menu
branch.
3. Press <UP> or <DOWN> until the desired menu option within the new menu
branch shows on the LED display.
4. Press <ENT> to accept the new option (the new option will show solid on the
