Clarion TB743W Flat Panel Television User Manual


 
English
Owners manual
16 TB741P/TB742P/TB743W
ADJ 2
VTR N/P
[
TV AREA
]
[
AUDIO OUT
]
NTSC AUTO
PAL
TV1 TV2 VTR1 VTR2
TV Mode Operations
[
TV AREA
]
[
VTR N/P
]
AUDIO OUT
HI
LOW
ADJ 2
Selecting VTR system (NTSC/PAL/
AUTO)
1. Display the adjustment menu as described
in the section, Selecting the adjustment
menu.
2. Press the [a] or [d] button to select
NTSC, PAL or AUTO.
When [AUTO] is selected, automatic
switching between NTSC and PAL may not
occur properly. In such cases, use manual
selection.
Press the [ADJ] button to return to the normal
screen mode.
The factory default setting is AUTO.
Setting the audio output sound
level
You can adjust an output sound level of audio
output terminal (RCA L/R).
1. Display the adjustment menu as described
in the section, Selectiong the adjustment
menu.
2. Press the [a] or [d] button to select a
desired mode and set it.
3. Press the [ADJ] button to return to the
normal screen mode.
The factory default setting is HI.
Changing the TV reception area
(TB741P only)
The factory default setting is OTHERS.
1. Display the adjustment menu as described
in the section, Selecting the adjustment
menu.
TV AREA
OTHERS
[
NEW ZELAND
]
[ AUSTRALIA ]
RTN
2. Press the [d] button to display a TV area
selecting screen.
3. Press the [w] or [z] button to select a
desired mode and set it.
Press the [BND] button when all adjustments
have been made to return to the adjustment
menu screen.
Press the [ADJ] button to return to the normal
screen mode.
Any station preset memories are lost when
the reception area is changed.
Watching a external device
Refer to the Instruction Manual of the unit
concerned for details on operating the external
device connected.
Press the [BND] button to select VTR (External
Device).
Each time the [BND] button is pressed, the
setting is switched in the sequence shown
below.