Clearplay CP-427-USB DVD Player User Manual


 
- 8 -
CONNECTIONS
Video Connections
The way in which you connect your DVD player and the kinds of cabling you choose can make a no-
ticeable dierence in picture and sound quality. Before you select one of the options, please make sure
that your other equipment (e.g. TV, receiver) has the required input/output channel.
Use either of the options below:
Notes on Progressive Scan:
If your TV can accept Progressive Scan 1.
feeds, your video connections should be
done as in the picture on the left to obtain
best possible picture quality from the
player.
Once connected see page 10 to set the 2.
connection type for the DVD Player.
Your TV may need adjustment to accept 3.
Progressive Scan feeds.
Do not substitute a component Video 4.
cable with an Audio/Video cable.
Although these types of cables do look
alike, the actual wires inside the cable in
which the signal passes along are very
dierent. Substituting cables will result in
poor picture quality and could damage
your equipment.
AUDIO COMPONENT
LR
COMPOSITE
S-VIDEO
Y P
b
P
r
TV
COMPOSITE VIDEO CABLE
(Included)
AUDIO COMPONENT
LR
COMPOSITE
S-VIDEO
Y P
b
P
r
TV
S-VIDEO CABLE
(Not Included)
For better picture quality, use
S-VIDEO CABLE (not included)
For good picture quality, use
COMPOSITE VIDEO CABLE (included)
AUDIO
COMPONENT
LR
COMPOSITE
S-VIDEO
Y P
b
P
r
TV
COMPONENT VIDEO CABLE
(Not Included)
For best picture quality, use
COMPONENT VIDEO cables (not included)