Filter
Top Products
- 27 -
PROBLEMS
If it appears that your DVD-Video player is faulty, rst consult this checklist. It may be that something simple has been
overlooked.
Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only
qualied service personnel can remove the cover or service this player.
NO POWER
Check if the power button on the front of the •
player is set to on.
Check if power plug of the mains cord is properly •
connected.
Check if there is power at the AC outlet by •
plugging in another appliance.
NO PICTURE
Check if the TV is switched on.•
Select the correct AV input on the TV.•
Check the video connection or cable.•
Check if channel selector is set to AV on the TV. •
(See your TV manual for instructions).
DISTORTED PICTURE
Press the VIDEO button to select the correct •
video output mode.
Check the disc for ngerprints and clean with soft •
cloth, wiping from center to edge.
Sometimes a small amount of picture distortion •
may appear. This is not a malfunction.
Ensure that ONLY one video output is connected.•
If connected through a VCR or other recording •
device, try connecting directly to the television
(This may be a result of anti-piracy measures.)
NO COLOR IN PICTURE
Check the video settings in the setup menu.•
The disc format is not according to the TV-set •
used (PAL/NTSC).
Ensure DVD player is not connected through VCR.•
PICTURE SWING
Relocate the unit further away from possible •
interference or emission source (e.g. Radio, Power
Amplier, Radiator, powerful magnets, etc.).
DISC CANNOT BE PLAYED
Ensure disc is placed properly into the disc tray.•
NO AUDIO ON DIGITAL OUTPUT
Check the digital connections•
Check the Digital Out menu to make sure that •
the digital output is correctly set.
Check if the audio format of the selected audio •
language matches your unit capabilities.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
Aim the remote control directly at the sensor on •
the front of the player.
Avoid all obstacles which may interfere with the •
signal path.
Inspect or replace the batteries.•
NO SOUND
Check audio connections.•
If using a Hi-Fi amplier, try another sound •
source.
Clean the disc.•
Check if the disc is defective by trying another •
disc
NO RETURN TO START-UP SCREEN WHEN DISC
IS REMOVED
Check to see if the program requires another disc •
to be loaded.
Reset by unplugging the player from the power, •
then connect the power again.
FUNCTION DISTURBED
The normal function of the product may be •
disturbed by external interference.
Disconnect and reconnect the power cord (may •
be required to resume normal operation).