MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
27
6.7. CONNECTION TO AN ETHERNET NETWORK
Our Ethernet connector is a RJ45 type. The maximum cable length is 300 ft. When you want to
use a longer cable, we suggest using repeater.
The below figure shows the straight through and the Crossover cables which are normally used
Network Cables.
6.8. POWER CABLE CONNECTION
Connect the provided Power adapter and cable to the rear power socket of the DVR as shown in
the below figure.
The power source is DC 12V 5A.
It should not be shared with other electrical equipment on the same line.
Frequent power cuts can cause crucial failures, so if you have an unstable power source, we
recommend the use of an Uninterrupted Power Supply or other backup power source.