Filter
Top Products
5-4-4. Motion/Alarm
- Choose the RECORD menu by using the ◀▶ button.
- Press the ▼ or ▲ button, the MOTION/ALARM menu shown in Fig. 5-9 will
be displayed.
Fig.5-9 Motion/Alarm Menu
Sensitivity
- Select the SENSITIVITY in the MOTION/ALARM menu by using the ◀▶
button and select one of sensitivities among Very high, High, Middle, Low and
Very low with the ▼ or ▲ button. Selected item will be highlighted in yellow.
Area
- Select the area in the MOTION/ALARM menu by using the ◀▶ button and
press the ▼ or ▲ button to open the window for motion detection area setup.
- When the window for motion detection area setup as shown in Fig.5-10 is
displayed on the screen, press the LIST button on the front panel or the remote
controller for choosing all the motion detection areas. The symbol, “O” will be
displayed, and it represents motion detection areas. The symbol, “X” represents
cleared motion detection areas.
Press the LIST button again to clear all the areas.
- Press the ◀▶ button and ▼ or ▲ button to setup motion detection area on the
specific region.
- Press the MENU button to return to the previous menu.
- 26 -