Filter
Top Products
Page 14 of 26 9033-SD Owner’s Manual •
••
• (V 1.1)
Proc Phase
This is Chroma (C channel) phase adjustment, expressed in degrees, ranging from –360 to +360 in
steps of one degree.
Audio Submenu
Menu Structure Parameter Type
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Grp1
Ch01-
Ch04
(x4)
Pol Output Polarity
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Grp2
Ch05-
Ch08
(x4)
Pol Output Polarity
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Grp3
Ch09-
Ch12
(x4)
Pol Output Polarity
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Embd
Grp4
Ch13-
Ch16
(x4)
Pol Output Polarity
Aud
Tone
TG1-TG4 (x4)
Tone Frequency
Embedded Group Enable
Enables or disables the embedding of a particular embedded audio group. Disabling a group preserves
the settings of the channels belonging to that group.
Output Source
Because the cards audio system functions like a router, each output can be sourced from any input
channel. This parameter lets you choose from the many different sources. Here is an explanation of the
different source names:
Source Name Description
EmXX Input embedded audio channel XX (1 through 16)
AeXX Discrete AES channel XX (1 through 16)
AnX Analog Audio channel X (1 through 8)
TgX Test Generator channel X (1 through 4)
Output Gain
The gain of each output is adjustable from +30 dB to –100 dB in 0.1 dB steps. After –100 dB gain is
set to –Inf, which means that output is present, but muted.
Output Polarity
If set to “Norm” output polarity is the same as input polarity, if set to “Inv” the output polarity is
inverted. This can be used to correct polarity errors in the input signals fed to the card.