Filter
Top Products
9033-SD Owner’s Manual •
••
• (V 1.1) Page 19 of 26
Menu Item Format Description
Composite
Y/C
YPbPr BetaCam
YPbPr MII
SD Input Type
YPbPr SMPTE
Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.
Video Signal
Controls
SD Composite
Contains
0.0 or 7.5 IRE of Setup
Specifies the amount of
setup (pedestal) in the
input video. It will be
removed by the decoder.
Menu Item Format Description
On
AES Input
Controls
AES Pair 1-8 SRC
Bypass
Off
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
Menu Item Format Description
Video Gain
Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift
Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain
Range 0-2000 Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360
Phase of C (Chroma) in
degrees.
Video Proc
Reset to Unity Confirm
Resets all of the proc
controls to unity.