Filter
Top Products
Page 18 of 26 9033-SD Owner’s Manual •
••
• (V 1.1)
Menu Item Format Description
Enable
Group Enable
Disable
Enables or disables the
entire group of 4 channels.
Embedded 1-16
AES 1-16
Analog 1-8
Source
(per channel)
Silence
Chooses the source for the
embedded audio. The
source for each channel
can be chosen separately.
Gain
(per channel)
Range (-400) – 400
Gain applied to embedded
audio output, one slider
for each channel.
Normal
Embedded
Audio Group
(Groups 1-4)
Phase
(per channel)
Invert
Inverts the phase of the
embedded audio.
Menu Item Format Description
Tone
Generator
Tone Generator 1-4
Frequency
Range 50Hz –16KHz
Selects the frequency of
the tone generated.
Menu Item Format Description
Card Name Up to 31 ASCII
This gives the board a
unique name that will
show up in the device list.
Selected Preset Range (1 - 5)
Loads parameters
previously saved.
Preset Name Up to 31 ASCII
Gives a unique name to
the preset being saved.
Preset Save Confirm
Saves the parameters as
preset selected and preset
name entered.
Preset Load Confirm
Loads parameters of
selected preset.
Presets
Reset Current
Preset
Confirm
Will load factory presets
and overwrite the save.