Filter
Top Products
9034 Owner’s Manual •
••
• (V 2.0) Page 21 of 28
Menu Item Format Description
Composite
Y/C
YPbPr BetaCam
YPbPr MII
SD Input Type
YPbPr SMPTE
Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.
GBR
HD Input Type
YPbPr
Selects the format of
input HD analog video.
Video Signal
Controls
SD Composite
Contains
0.0 or 7.5 IRE of Setup
Specifies the amount of
setup (pedestal) in the
input video. It will be
removed by the decoder.
Menu Item Format Description
On
AES Pair 1-8 SRC
Bypass
Off
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
On
AES Pair 1-8
Passthrough
Off
AES output pair X will
be a low latency copy of
AES input pair X.
On
AES Input
Controls
AES Pair 1-8
Zero Delay
Off
Embeds with low (<1 ms)
latency. Overrides routing
choices.
Menu Item Format Description
Video Gain
Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift
Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain Range 0-2000
Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360
Phase of C (Chroma) in
degrees.
Video Proc
Reset to Unity Confirm
Resets all of the proc
controls to unity.