Filter
Top Products
System Setup
1.3 OSD LANGUAGE (On-Screen Display Language)
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions , the closed captions will be shown on the
screen. Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped etc, for several
minutes, a screen saver will appear on the screen. You can press any key or button except [STANDBY] to wake it
up.
The unit will go into the standby mode the screen saver mode. You can press [STANDBY] to
switch it on.
OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: During a playback or in the paused status each time you open the disc tray, the unit will memorize the last
playback time. Next time when you insert the same disc and close the disc tray to load the disc, the unit will play
from the memorized point.
OFF: Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker
respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
is playing
after 20 minutes in
,
-11-