Craig CLC503 Flat Panel Television User Manual


 
SETTING Menus
Press the MENU button to enter to the
setting menu (press again to exit).
Press the or button to
highlight the function within
the menu you want to adjust. Press the
(enter) button to go to the sub-menu
to confirm the selection.
During
setting, press the EXIT button to
return to previous menu.
Navigator
select and
Press the
Navigator or button to adjust.
PICTURE MENU-for picture quality setting
Press the MENU button, the setting
menu will appear on the screen and
PICTURE highlighted.
Press the button to enter to
the PICTURE menu.
Press or button
repeatedly until the desired setting is
highlighted (Picture Settings, Screen
Settings, PC Settings*, Color
Temperature or Advanced Picture
Settings).
Press the button to enter into
the sub menu, except for Color
Temperature.
When Color Temperature is highlighted,
Press or button
repeatedly to select NORMAL, WARM
or COOL
.
(enter)
(enter)
will be
the Navigator
The PICTURE
setting menu will appear on the screen.
the Navigator
then press the MENU button
to save the settings and exit
NOTE: PC Settings is available only under the VGA source mode.
22
THE ON-SCREEN MENU
If Picture settings is selected, press
(enter) button to enter.
Press the Navigator or button
to select the picture modes to
Dynamic, Movie, User or Standard
then press the MENU button to save the
setting and exit.
If User is selected, using the
Navigator,,, and (enter)
buttons to adjust Brightness,
Contrast, Color, TINT or Sharpness as
desired.
The PICTURE
SETTINGS menu will appear on the screen
and the Picture Mode will be highlighted.
quality
as desire
When finished, press the MENU
button to save the setting and exit.
If Screen settings is selected, press
(enter) button to enter. The SCREEN
SETTINGS menu will appear on the screen
23
and Screen Size will be highlighted.
Press the Navigator or button to
Press the Navigator or button to select
Horizontal Position or Vertical Position
then press the (enter) button to enter.
Press the Navigator or button to set
the picture position within the screen. When
finished, press the MENU button to save
the setting and exit.
THE ON-SCREEN MENU