Filter
Top Products
23
22
If your TV will be turned on, you will be able to use its features.
Turing on the TV
First, connect power cord correctly. When the indicator
illuminates red is standby mode.
Press the POWER/ button on the remote control then the
indicator illuminates orange, after the TV initialization
finished,
the indicator turns to green. It means the TV is in power mode.
When you press the POWER/ button on the remote
control once again, the power/stand-by Indicator illuminates red
in standby mode.
If you intend to be away on vacation, disconnect the power
plug from wall power
outlet.
1. Press the VOL +/VOL- button on the control panel or the
VOL +/VOL- button on the remote control to adjust the volume.
2. If you want to switch the sound off, press the MUTE/ button
on the remote control.
3. You can cancel this
function by pressing the MUTE/ button
on the remote control.
Press the CH +/CH- button on the control panel or the Numerical
buttons on the remote control.
TURNING THE TV ON
VOLUME ADJUSTMENT
PROGRAM SELECTION
You don't have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set to standby after the
preset time has elapsed.
Press the SLEEP/ button on the remote control repeatedly
to select the number of minutes.
The display will appear on
the screen followed by close,
Off, 15, 30, 45, 60, 90 and 120 minutes.
When you are looking TV programs ,you can press the button on
the remote control to return to the previous channel.
SLEEP TIMER
RETURN FUNCTION
BASIC OPERATIONBASIC OPERATION
SOURCE INPUT SWITCH
Off
SOURCE
TV
CC
S-Video YPbPr VGA HDMI
MTS
1. Press SOURCE/ button on the remote control to the source menu.
The source menu rank as: TV - AV - SVIDEO - YPBPR - VGA - HDMI.
2. Press button on the remote control to select the source in the menu.
When the
bar means the covering source selected.
▼ / ▲
highlighted
TV
AV
SVIDEO
YPBPR
VGA
HDMI