Filter
Top Products
21
20
You don't have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set to standby after the
preset time has elapsed.
Press the SLEEP/ button on the remote control repeatedly
to select the number of minutes.
The display will appear on the screen followed by circle,
OFF, 5, 10, 15, 30, 45, 60, 90, 120, 180 and 240 minutes.
When you are looking TV programs ,you can press the button on
the remote control to return to the previous channel.
SLEEP TIMER
RETURN FUNCTION
1. Press SOURCE/ button on the remote control to the source menu.
The source menu rank as: TV - AV - S-Video - Component - HDMI - VGA.
2. Press button on the remote control to select the source in the menu.
When the bar means the covering source selected,
▼ / ▲
highlighted
then press / to confirm.ENTER
SOURCE INPUT SWITCH
BASIC OPERATIONBASIC OPERATION
Sleep Timer: Off
TV
AV
S-Video
Component
HDMI
VGA
INPUT SOURCE
If your TV will be turned on, you will be able to use its features.
Turing on the TV
First, connect power cord correctly. When the indicator
illuminates red is standby mode.
Press the POWER/ button on the remote control then the
indicator illuminates orange, after the TV initialization finished,
the indicator turns to green. It means the TV is in power mode.
When you press the POWER/ button on the remote
control once again, the power/stand-by Indicator illuminates red
in standby mode.
If you intend to be away on vacation, disconnect the power
plug from wall power outlet.
1. Press the VOL +/VOL- button on the control panel or the
VOL +/VOL- button on the remote control to adjust the volume.
2. If you want to switch the sound off, press the MUTE/ button
on the remote control.
3. You can cancel this function by pressing the MUTE/ button
on the remote control.
Press the CH +/CH- button on the control panel or the Numerical
on the remote control.
TURNING THE TV ON
VOLUME ADJUSTMENT
PROGRAM SELECTION
SOURCE
TV
CCMTS
EPG
CH LIST
FAV