Filter
Top Products
11
Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Combination
Connecting a Cable System
If your cable set-up is not described below, please contact your cable company for more infor-
mation.
If your cable system does not require the use of a
cable box, simply press or screw the incoming cable
onto the antenna terminal on the back your TV/VCR
Combination.
If your cable system requires you to use a converter box for all channels, connect the
incoming cable to the IN terminal on the converter box. Connect another cable between the
OUT terminal on the converter box and the antenna terminal on the TV/VCR Combination.
You will need to keep your TV/VCR Combination tuned to channel 3 or 4 and change chan-
nels using the converter box.