Filter
Top Products
35
Chapter 7 : Additional VCR Features
Setting the Program Recording
Here’s an example of how to record a program broadcast on channel 26 from 8:00 PM to 9:00
PM Sunday, 6th of February 2000, in EP mode.
1. With the TV/VCR Combination turned on, press the MENU button until “Program” menu is
displayed.
2. Press the VOLB button, then today’s date(Feb.05) appears in Red.
3. Press the VCHW buttons to set daily and weekly recording.
Press the VCHW buttons to setting changes as follows:
2/5(today) ----> 6 - - 28 ----> 1(next month) ----> 2 - - 4(next month) ----> Every SUN ----> Every
MON - - Every SAT ----> MON~FRI ----> SUN~SAT ----> 5(today).
4. Press the VOLB button, then set the hour of the recording Start time to “8” with the VCHW
buttons.
5. Press the VOLB button, then set the minute of the recording Start time to “00” with the
VCHW buttons.
6. Press the VOLB button, then set the hour of the recording Stop time to “9” with the VCHW
buttons.
7. Press the VOLB button, then set the minute of the recording Stop time to “00” with the
VCHW buttons.
8. Press the VOLB button, then set the channel to “26” with the VCHW buttons.
9. Press the VOLB button, then set the recording speed to “EP” with the VCHW buttons.
You select the tape speed “AT” mode, default mode is set to “SP”.
If the tape remaining is not enough, the recording tape speed automatically changes to“EP”.
Select Enfer Next
1
Adjust Select Exit
2
Adjust Select Exit
3
Program
Program Program
Adjust Select Exit
4
Adjust Select Exit
5
Adjust Select Exit
6
Program
Program
Program