Filter
Top Products
Chapter 2 : Connecting an Antenna or Cable to Your TV
8
Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if you have one
antenna for VHF signals and one antenna for UHF signals.
If your antenna system has both a coaxial lead and twin 300-ohm leads, you must
obtain a combiner (available at your local electronics store). Press or screw the coaxial
lead onto the combiner; place the twin leads underneath the screws on the combiner and
tighten the screws. Press the cable from combiner onto the antenna terminal on the back
of your TV.
If your antenna system has two sets of twin 300-ohm leads, you must obtain a com-
biner (available at your local electronics store). Place one set of twin leads underneath
the screws on the combiner and tighten the screws. Do the same with the other set of
twin leads. Press the cable from the combiner onto antenna terminal on the back of your
TV.
Connecting a cable system
If your cable set-up is not described below, please contact your cable company for more
information.
If your cable system does not require the use
of a cable box, simply press or screw the
incoming cable onto the antenna terminal on the
back of your TV.