Filter
Top Products
Chapter 3 : Operating Your TV
11
Changing Channels
You can change channels in three ways:
1 The
VCHW buttons will take you through all memorized chan-
nels, one by one. The
VCHW buttons will not access channels
that have not been programmed into the TV's memory. For more
information about programming channels into memory, see the
section “Programming your TV's Channel Memory,” above.
2 The number buttons (0-9) will take you to any channel, even if it
has not been memorized. To change to a channel, enter its num-
ber; the TV will tune to the new channel when you enter the sec-
ond digit of the channel.
3 The PREV. CH button will take you instantly to the last channel
you were watching.
Changing the Volume
1 To change the volume of the TV set, use the CVOLB buttons
on the remote or on the front panel.
2 To quickly turn off the sound, press the MUTE button on the
remote. The volume bar will appear on screen, colored red. To
return the volume to its previous level, press MUTE again.
Changing the TV's Channel Memory
Your TV's memory determines the channels that are available using the VCHW
buttons. You can add channels to this memory or remove them from memory. If a
channel is removed from memory, you can tune to it with the number buttons, but you
cannot tune to it with the
VCHW buttons.
Adding a channel to memory
1 Use the number buttons to tune to the channel.
2 Press the ADD/ERA button on the remote control. The channel
will turn from magenta to green to show it has been added.
1
2
1
2
3
1
2