Filter
Top Products
18
Initial Setup
Clock Set
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
Use […/†] to select ‘Clock Set‘.
3
Press [ENTER]. The ‘Clock Set’ menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
…/† (up/down): Changes the setting at the current cursor position.
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
Auto Scan
The DVD Recorder+VCR has a frequency synthesized tuner capable of
receiving up to 119 channels. These include VHF channels 2-20, 74-80, UHF
channels 21-69 and CATV channels 1-41.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
While ‘Installation‘ is selected, press […/†] to select ‘Auto Scan‘.
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner’s memory.
• After Auto Scan is complete, follow the instructions above to make sure that the Tuning Band is set correctly.
Installation
Manual Set
•Auto Scan
Clock Set
Adjust channels
Choose OK Exit
ENTER SETUP
œ √
…
†
Installation
Manual Set
Auto Scan
•Clock Set
Adjust channels
Choose OK Exit
ENTER SETUP
œ √
…
†
Auto Scan TV
1 CHs found
Clock Set
…
1 1 2010 00 40
†
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 18 mac001 1200DPI 90LPI