Daewoo DLP-32C1 Flat Panel Television User Manual


 
34
MUTE
PICTURE
ASPECT
SOUND
POWER
RECALL
MULTIMEDIA
PR
PC
Clock 1 2 : 0 0
HDMI
Clock 1 2 : 0 0
Component
Clock 1 2 : 0 0
Selection of AV and
Multimedia Input Signal
When connecting PC, STB, DVD with Multimedia
1. Pressing the “MULTIMEDIA” button on the remote controller.
The screen changes as follows:
PC => HDMI => Component => PC
HDMI & PC mode
1. For optimum picture quality, use 1024x768 computer or set top box output at a 60Hz refresh rate. Using other formats
or refresh rates may result in reduced picture quality.
2. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia Input table.
Multimedia Input Format
Resolution V-freq HDMI PC(D-Sub) Component Standard
640 X 480
60Hz o o x
72Hz o o x
75Hz o o x VESA Standard
800 X 600
60Hz o o x VESA Standard
72Hz o o x VESA Standard
75Hz o o x
1024 X 768
60Hz o o x VESA Standard
70Hz o o x VESA Standard
75Hz o o x VESA Standard
720 X 480 60Hz o x o
720 X 576 50Hz o o o
1280 X 720p
50Hz o x o
60Hz o o o
1920 X 1080i
50Hz o x o
60Hz o o o
720 X 480i 60Hz x x o
720 X 576i 50Hz x x o
Note :
• 1280 X 720 mode is commonly used for Component.
• So if this mode is used at PC mode, the screen can be enlarged.