Filter
Top Products
27
To Watch T V
- If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON
in AV1 mode. Otherwise, TV will come ON in RF mode.
1. Turning on the TV.
• Plug the AC lead into a power outlet.
• 42G1 : The Stand By LED lamp turns on in red.
42U1 & 46U1 : VFD displays the text “Stand By”.
• Press “
” button of the main body or “POWER” but-
ton on the remote control.
• 42G1 : The Stand By LED lamp on the front panel be-
gins to flicker in red and blue colour and the TV turns
on.
42U1 & 46U1 : VFD displays the text “HELLO” and cur-
rent mode.
2. Adjust program.
• Select the desired programme by pressing the “PR”
button or the number buttons.
3. Adjust volume.
• Sound reduces by pressing the “VOL” button.
• Sound increases by pressing the “VOL” button.
Note :
Sound mutes by pressing the “MUTE” ( ) but-
ton.
4. Turning off the TV.
• Press “
” button of the main body or “POWER” but-
ton on the remote control.
• 42G1 : TV turns off and the power lamp changes to
red.
42U1 & 46U1 : VFD displays the text “Stand By”.
POWER
16
PR 19 – – – – –
Mono
Clock 1 2 : 0 0
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
POWER