Daewoo DQR-1000D DVD Recorder User Manual


 
PLAYBACK
24 25
Playback
Playback
Playback
Playing a DVD video disc
Inserting a disc
1
Press the [OPEN/CLOSE] button on the front of the DVD recorder. The
disc tray opens.
2
Insert the disc carefully into the tray, with the label uppermost and
press [PLAY/PAUSE] or [OPEN/CLOSE] on the front. The information on
the disc is read.
3
Playback begins automatically.
Playable discs
This DVD recorder will play the following systems:
DVD video (Super)Video-CD disc
DVD+RW disc DVD+R Disc
DVD-RW (video mode, finalised) DVD-R
CD-R CD-RW
Audio CD MP3-CD
You can operate the DVD recorder using the remote control or the buttons on
the front of the DVD recorder.
How to insert a double sided DVD
Double-sided discs are not printed on either side. The labelling is in the centre
on each side of the disc. The labelling of the side you wish to play must be
uppermost.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control. Press and hold
the [STOP] button on the remote control until the dialog box shows 'OPENING'
or 'CLOSING'.
1
A menu may appear during playback of a DVD. In case titles and
chapters are numbered, press a number button on the remote control.
You can also select a menu item using [œ√…†] and confirm with
[OK].
2
If playback does not start automatically, press [PLAY/PAUSE]. The
display shows: title, chapter, time elapsed.
3
To stop the disc, press [STOP].
4
To eject the disc, press [OPEN/CLOSE] on the front of the DVD recorder.
The menu on the screen is showing an 'X'
Some DVD discs can be manufactured so that certain steps are required before
the disc can be played, or so that only limited operation is possible during
playback. When an 'X' appears on the screen the selected feature is not
possible.
The screen is showing regional code information
Since DVD films are not normally released in all parts of the world at the
same time, all DVD players have a specific regional code. Discs can be
given a regional code. If the regional codes differ between the player and
the disc, playback is not possible.
The regional code is shown on the label on the back of the machine.
The regional code does not apply to recordable DVD discs.
The screen is prompting me to choose an option from the menu.
Select the option you want using
[œ√…†]
or the number keys [0..9].
In some cases you need to confirm with [OK].
You can also access the menu using [DISC MENU] on the remote control.
How to access hidden information
1 Press the [DISC MENU] button on the remote control. A menu will appear
on the screen. For some feature films this may appear after an introductory
sequence.
2 Select the option you want using
[œ√…†]
or the number keys [0..9].
Confirm with [OK].