Daewoo DQR-1000D DVD Recorder User Manual


 
SETUP
56 57
Access control Access control
1
Switch on the TV set. If required, select the programme number for the
DVD recorder.
2
Switch on the DVD recorder using [STANDBY].
3
Press [SYSTEM MENU] on the remote control. The menu bar appears.
4
Select the ' ' icon using [] or [].
5
Select ‘Features’ using [œ] or [] and confirm with [].
6
Confirm 'Access control ' using [].
7
Enter a 4-digit code of your choice. Enter the same code again as
confirmation.
8
Select ‘Change code’ using [] or [] and confirm with [].
9
Enter the new code using the number buttons [0..9]. Enter the same
code again as confirmation.
10
Quit the feature using [œ] and [SYSTEM MENU].
Changing the PIN code
I have forgotten my code
Press [STOP] four times, then press [OK]. Access control is now switched off.
You can now enter a new code as described above.
Changing the country
The set filter values depend on the respective country. It is therefore
necessary to enter the country to which these filter values apply.
1
Switch on the TV set. If required, select the programme number for the
DVD recorder.
2
Switch on the DVD recorder using [STANDBY].
3
Press [SYSTEM MENU] on the remote control. The menu bar appears.
4
Select the ' ' icon using [] or [].
5
Select ‘Features’ using [œ] or [] and confirm with [].
6
Confirm 'Access control ' using [].
7
Enter a 4-digit code of your choice. Enter the same code again as
confirmation.
8
Select ‘Change country’ using [] or [] and confirm with [].
9
Select the corresponding country using [] or [].
10
Confirm with [OK].
11
Quit the feature using [œ] and [SYSTEM MENU].