Filter
Top Products
MISCELLANEOUS
62 63
Before you call an engineer
Technical data
Technical data
Voltage AC 230V~ 50Hz
Power consumption 22W
Power consumption (standby) less than 5W (clock display off)
Measurements in cm (W/H/D) 43.5/8.8/32.6 (Disc tray closed), 46.1 (disc tray open)
Weight without packaging approx 4.0 kg
Power outage/no power Channel and timer information remain saved for up to 1 year, the
time is saved for up to 12 hours.
Operating position maximum 10 degree inclination in all directions
Ambient temperature 15°C - 35°C
Humidity 25% - 75%
DVD recorder is not
responding.
‘Switch off,timer recording'
flashes on the TV screen.
Error message : 'Insert
recordable disc'.
The error message 'Disc
locked' appears briefly on the
screen.
Error message: 'Memory full'.
The 'Data error' message
appears on the screen.
'Collision' appears on the
screen.
➠ While a programmed recording is being made, you cannot operate
your recorder manually. If you want to cancel the programmed
recording, press [STANDBY].
➠ The DVD recorder was switched on several minutes before the start
of a programmed recording. Switch off the DVD recorder with
[STANDBY]. A programmed recording (timer) will only function if the
DVD recorder is switched off (button [STANDBY] ).
➠ Either no disc has been inserted or you cannot record to this disc.
Insert a disc that you can record onto. Switch off the DVD recorder
using [STANDBY].
➠ A write-protected disc has been inserted. Cancel the protection (see
'Preventing accidental erasing of discs' in 'Manual Recording') or
insert a different disc.
➠ If this error message appears after pressing [TIMER], then all the
TIMER blocks are already programmed. No more recordings can be
programmed. Press the [√] button. If you want to clear or check a
programmed recording (TIMER block), select it with […] or [†].
➠ The data for the recording could not be transferred. Please check
the date, start time and end time of the programmed recording.
➠ The information for two programmed recordings overlap.
➠ If you ignore this error message the TV programme with the earlier
start time will be recorded first. You will miss the start of the
second programme.
➠ Change the information for one of the recordings.
➠ Delete one of the recordings.