Daewoo DSD-9502T DVR User Manual


 
Important care and safety advice
22
This Digital PVR has been manufactured to meet international safety standards, but you
must take care to operate it safely.
It is important that you read these safety instructions.
If you have any doubts about the installation, operation, or safety of this Digital PVR,
contact Daewoo, as shown in the next page.
Electrical warning
Your Digital PVR contains a high voltage which is sufficient to cause a dangerous
electric shock.
Never remove the Digital PVR cover.
There are no user-serviceable parts inside.
Switch off the power supply from the mains wall socket. before you disconnect any
equipment from the Digital PVR.
Never push anything into holes, slots or other openings in the case.
Positioning the PVR
The Digital PVR and cables should be placed so that they not likely to be walked on or
pinched by items placed upon or against them.
Do not expose your Digital PVR to direct sunlight or to extreme temperatures (above
40°C or below -5°C), high moisture levels or dust.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The ventilation should not be impeded by covering the ventilation openings with
items,such as newspapers,table-cloths,curtains,etc.
Do not Place the Digital PVR on an unstable surface or on a bed, sofa, rug, or similar
surface as this may block air ventilation and cause it to overheat.
Never place the Digital PVR over a radiator or in an unventilated cabinet. No naked
flame sources, such as candles, should be placed on the apparatus.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and servicing instructions in the
literature accompanying the appliance.
DSD-9502T 2006.9.13 2:16 PM ˘ ` 2 mac001 1200DPI 90LPI