Filter
Top Products
Daily Use
18
Switching On and Off
SWITCHING ON
1. If the Indicator is not lit, then the TV set is powered off.
You must press the button on the TV set.
The set will switch to stand-by mode and then the Indicator will illuminate in Red.
2. Press the POWER button,
PR button or NUMBER button on the remote controller or PR
button on the TV set.
The TV set will be switched on and then the Indicator will change to Green.
SWITCHING OFF
1. Press the POWER button on the remote controller to return the set to its stand-by mode.
The Indicator will illuminate in Red.
2. Press the button on the TV set to switch the TV set off completely.
NOTE: If you don’t use the set for extended periods of time, unplug the AC cord from Power
outlet.
Recall
The Recall button is used to display the current status; Mode (AV, Component, PC) and Signal
information for 4 seconds.
In TV mode, the Programme number and Station Name, Sound mode are displayed.