Daewoo DRT-10 DVD Recorder User Manual


 
50
If Lock Disc is set to Yes in the DISC Operation
menu, you cannot rename your disc; see page 49.
Finalise Disc (DVD-RW, DVD±R)
Finalising a DVD±R (or DVD-RW) locks its
recordings permanently so the disc can be played
on most standard DVD players or computers
equipped with DVD-ROM drives.
1
Press [DISC OP] to go to Disc Operation mode.
2
Use [œ/] to select Finalise Disc menu for a
DVD±R (or DVD-RW). Then press
[] or [].
3
Use [œ/] to select Yes. Press [OK] to make
the disc compatible.
4
After the process is finished, the recorder goes
to the Information menu automatically.
Make Compatible
'Make Compatible' for a DVD+RW will
automatically create a menu screen for navigating
the disc. This function is accessible by pressing
[DISC OP].
1
Press [DISC OP] to go to Disc Operation mode.
2
Use [œ/] to select Make Compatible menu
for a DVD+RW. Then press
[] or [].
3
Use [œ/] to select Yes and press [OK] to
make the disc compatible.
4
After the process is finished, the recorder goes
to the Information menu automatically.
Once you have finalised a DVD±R (or DVD-RW)
disc, you cannot edit or record anything else on
that disc.
It may take over 7 minutes for finalizing the edited
disk, you must wait till the set finishes the
finalizing operation.
•‘Make Compatible can take up to 3-4 minutes
depending on the type of disc, how much is
recorded on the disc, and the number of titles
on the disc.
If you do not make your DVD+RW disc
compatible, your edits may not be recognized
by other DVD players.
Some DVD+RW discs may be manufactured as
edit compatible. In this case, you will see a
message saying Disc already edit compatible.
It should play on your DVD player.
Disc Manager
œ Yes
Press <OK> To Confirm.
Disc Operation
Are you sure you want to finalise
this disc?
œ Yes
Press <OK> To Confirm.
Disc Operation
Are you sure you want to make
this disc edit compatible?
0817DTBD-LN11PA-AGN(GB) 2006.8.17 4:8 AM ˘ `50