Filter
Top Products
17
Initial Installation
■ Switch the TV on.
■ You can also start "AUTO SET" in the SETUP "PR PRESET"
➝ "AUTO SET".
■ To tune in new stations (manual tuning) and to enter station names see page 24-25.
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of your
TV set (see its user manual).
• In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
Setting up the player
SETUP:END
PLEASE WAIT...
CH 25
RF OUTPUT SET
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
CURRENT CH 52
RECOMMENDED CH 54
You should see this picture the first time you switch on the TV and
player.
1
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country.
Clock is automatically set.
2
If other stations are positioned on near the current RF OUTPUT CH,
the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
3
Press the [OK] button to confirm the recommended PR.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.
Otherwise ...
exit the basic installation function and enjoy your player.
4
PLEASE CHANGE THE TV
CH TO 54.
IMPORTANT!
MANUAL SET
PR01 P-O1 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
OK:CONFIRM SETUP:END
AUTO SET
Basic Operation
DC-G8GD1P-JL (DESUK) 2006.4.19 9:42 AM ˘`17