Datamax VMP-2000 TV Mount User Manual


 
13
Data Connection
Datamax-O’Neil VMP-2000 Installation Guide
Power Supply
The VMP can run solely from a power supply. For more information, see Input Power and
Connection Requirements on page 8. Use only the Datamax-O’Neil approved power supply.
Requirements
Use the Datamax-O’Neil recommended power supply. FAILURE TO USE A DATAMAX-
ONEIL WILL RESULT IN DAMAGE TO THE PRINTER OR THE PRINTER WILL NOT
OPERATE PROPERLY.
Guidelines
Do not install cables or connections near wet areas.
Do not install cables near, or around, sharp edges.
Do not install cables near heat sources.
Do not install cables at “pinch locations” (for example, near doors or under a seat).
Note:
The operating temperature of this portable printer is 50° C. However, the operating
temperature when used with Datamax-O’Neil power supply for charging the portable
printer is limited to 35° C. Please charge the printer in a suitable location that meets this
temperature requirement.
Power Supply