Filter
Top Products
–
10
–
EN
Loading the Batteries
Front Panel Display
Displays During Operation
FUNCTIONAL OVERVIEW
1. Open the battery compartment cover.
2. Insert two “AA” (R6P) batteries, with
each one oriented correctly.
3. Close the cover.
P.SCAN
SACD
A
M
Lights up when the inserted
disc is being played back.
Displays a type of the disc
which is on the tray.
• DVD: DVD-Video
• DVD A: DVD-Audio
• M: Playing the MULTI-CH AREA
of Super Audio CD
• CD:
Audio CD, MP3, JPEG, WMA
Lights up when the
disc playback comes
to a pause.
Lights up when the
A-B repeat function is on.
Lights up when the
repeat function is on.
Lights up when playing back
in slow mode. (DVD)
Displays the elapsed time of the title
or track. The number of a new title,
chapter, group or track is displayed when
a chapter or track is switched.
Selected HDMI output mode is displayed.
Lights up when the ALL
repeat function is on.
Lights up when the
progressive scan
system is activated.
Lights up when a
Super Audio CD is
on the tray.
Power on
No disc inserted or
cannot read
Tray open
Tray closed
Loading the Disc
HDMI output mode
(480p) is selected
Power off
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(OFF) is selected
Cautions On Batteries
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate within a
close proximity of the main unit, replace the batter-
ies with new ones, even if less than a year has
passed.
• The included batteries serve only for verifying opera-
tion. Replace them with new batteries as soon as
possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the and marks
in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such
as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
HDMI Mode and Actual Output Signals
OFF
OFF
480p 1080i
1080i
1080i1080i
480p
480p 720p
720p
720p720p
480p
720p
1080i
480p
1080i
480p
720p
480p
480p
480p 480p 480p
OFF
OFF
OFF
HDMI mode of this unit
Supported
HDMI format of
Display device
E61E0/E1UD(EN).qx3 05.6.10 17:26 Page 10