Filter
Top Products
11
BATTERY INSTALLATION
Slide the battery compartment cover.
Install two “AAA” batteries (supplied), paying close attention to the + / - polarity diagram in the battery compartment.
Replace the compartment cover.
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1 Use only the size and type of batteries specified.
2 Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause
damage to the device.
3 Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4 If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5 Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).
NOTES:
• When there is an obstacle between the TV and the remote control, the remote control may not operate.
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the Remote sensor of the TV, the remote
operation may be unstable.
POWER SOURCE
Use the AC line cord provided for operation on AC. Insert the AC cord plug into a
standard 120V 60Hz grounded AC outlet.
NOTES:
• Never connect the AC line cord plug to anything other than the specified voltage
(120V 60Hz). Use the attached power cord only. • If the polarized AC cord does not
fit into a grounded non polarized AC outlet, do not attempt to file or cut the blade. It
is the user's responsibility to have an electrician replace the obsolete outlet.
REMOTE CONTROL