Digimate DGL32 Flat Panel Television User Manual


 
3
TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN
HANDLING YOUR DISPLAY, PLEASE BE AWARE ALL WARNINGS AND SAFETY PRECAUTIONS
CONTAINED AS BELOW.
Never Insert anything into DISPLAY!!
Do not insert anything through the openings in the unit, where they
can touch dangerous voltage points or damage parts.
Never spill liquid of any kind on the Display
Do not attempt to service the DISPLAY yourself!!
Opening or removing covers may expose you to dangerous voltages and
other hazards. Refer all servicing to qualified service personnel.
Note:
1. Read all safety and operating instructions before operating your new Display.
To ensure good ventilation, a distance of more than 4” shall be maintained between
the Display and any other furniture.
2. The operating temperature for this Display is 5 ~ 35 °C, storage temperature is 0 ~ 60 °C
Do not touch your DISPLAY and antenna during thunderstorms!!
Unplug the Display during thunderstorms or if it is not going to be
used for an extended period.
Failure to do so may result in electric shock or fire.
ATTENTION!!
Unplug the DISPLAY from the wall socket before cleaning.
Use a damp cloth for cleaning.
Do not use liquid or aerosol cleaners.
Well ventilation is required!!
To ensure reliable operation of the product and to protect it from overheating, the ventilation
must not be blocked or covered.
The display should be no less than 4 inches from the wall, and always keep
the vent clean.
Do not place your DISPLAY in a cramped and inadequately ventilated place.
Avoid placing your DISPLAY upside down at any time.