Q-See QSD32824-250 DVR User Manual


 
Operation Manual-4CH Duplex DVR
10
Play record list Menu option
Logout
Channel auto sequence. The iron wont display if the order of auto sequenceis
OFF”.
Move the mouse up or down to move the cursor. Click a left mouse button to change the
settings. Click a right mouse button to go back to the previous.
Hold the left mouse button to click the icon . You will see the screen below on the
monitor (Fig (b)).
B: The DVR Front Panel or Remote Control
After system boot-up, Press the “MENUbutton on the DVR front panel or remote control
and there will be a login window. There is one factory-preset login account/password
admin/111111at admin level. The user can use it to login to the system for the first time.
After logging in to the system, press MENUbutton to make any changes to the DVR
settings and you will see screen on the Menu options on the monitor as Fig (b). Then press
the “UP” or “DOWN” key on the DVR front panel or remote control to move the cursor. Press
“SELECT” button on the front panel or remote control to change the settings. In the MAIN
MENU, the cursor “ ” will be shown on the screen right next to each sub menu. To return
to the previous screen, press “MENU” button on the front panel or remote control.
6.1 Camera
Use this option to adjust the color for each channel (1,2,3,4). Go to DISPLAY for the option
Fig (b)