Q-See QSD32824-250 DVR User Manual


 
Operation Manual-4CH Duplex DVR
13
pressing the [QUAD] button on the DVR
front panel or remote control, or using
the left mouse button to click the time
period 24.
- Grey bar: No recording will be made for
this time period unless user activates
manual recording.
- Red bar: The time period with a red bar will continuously record (Time record) unless you
manually stop recording during that time.
- Green bar: The system will record whenever motion is detected. (See the following
chapter “MOTION DETECTION”)
6.3 Alarm
A: [BUZZER DURATION]
It sets the buzzer duration time (in seconds)
after an alarm is activated.
Value options are:05, 10, 15, 20, 25, 30,
CONT, OFF” (in seconds). Default isOFF.
When buzzer durationis cont, the buzzer
will sound continuously.
B: [EVENT REC DURATION]
This option sets the length of time (in seconds) recording continues after a motion recording
event ends.
Value options are: “05, 10, 15, 20, 25, 30(in seconds).