Filter
Top Products
2. Make sure the Hard Drive (1) is in the bay (2) and
locked.
4. After you attach all 4 cameras
you will see quad screen on the Monitor
3. Plug the DVR power cord into the bottom
connector on the back of the DVR (1)
1. Connect the other end of the camera cable to the camera's power supply and to the Video IN on the DVR
Push the connector from the power supply (1) into the
red connector with the short chrome head (2). Plug
power supply into outlet near DVR.
Line up the opennings on the yellow BNC connector (1)
with the stubs on the top & bottom of the connection
on the DVR (2), push in and then turn clockwise to
lock in place.
You need to push the drive in hard to snap it into
the connector in the DVR
Turn the key from the horizontal position (1) to the
vertical position (2) to lock the hard drive bay.
Turn the DVR on by pushing in on the (-) end of the
power switch above the power connector (2)
Page 3