Q-See QT17DVR4C DVR User Manual


 
To Playback the Recording:
NOTE: Recording will not be interrupted while you are in Playback mode.
1. Using the remote control, push CHECK
Select "All Record" and hit the ENTER button.
2. Select "All Record" and hit ENTER.
You can now use the number pad to enter
a specific date and time then use the arrow
keys to select "Start" and hit the ENTER button.
3. This will bring up a calender and the file you
created will be listed at the bottom.
Use the arrow keys to select it and hit the ENTER
button to playback.
To stop playback hit EXIT on the remote control.
Page 6