Filter
Top Products
To Record With Your DVR :
There are 3 modes for recording.
1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD
button again.
2. Motion Detection Recording: This will record only when there is a Motion in front of the camera.
3. Time Schedule Recording: Use this option to record during specific times.
To Set Up Motion Detection Recording:
Use the remote control and push SETUP, then follow the instructions below:
1. Select "Work Set" using the directional arrows
and hit ENTER.
2. Use the directional arrows to select "Setup"
and hit ENTER
3. Select the first heading under "Week" and use the
+/- keys to change setting to "Everyday", then use
number pad to change "First Period" to 00.00 - 23.59.
Then use the arrow keys and number keys to
change the "Type" to "Motion".
Repeat this process for the other channels
4. Use directional arrows to select "Return" at the
bottom of the page and hit ENTER.
Use directional arrows to select "Setup" under
"Area Set", then hit ENTER button. If the screen is
all blue this means the entire area is covered by
motion detection. If not push ENTER button again
to make it blue. Do this for the other channels.
Page 4