Filter
Top Products
DST-HD1100E HDTV DIGITAL RECEIVER
5
1.2 Rear Panel Jacks
VIDEO OUT
If your TV or monitor has Audio/Video capability, connect this jack to the AV Input jack on your TV or
monitor using an Audio/Video cable.
Left/Right ANALOG-AUDIO OUTPUTS(with Digital Video Output)
Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these
terminals when you use YPbPr or RGB for video.
RF INPUT (75 Ohm)
Connect the antenna here
DTV Output Selector(Monitor/Y, PB, PR)
Connect to the Y-PB-PR/RGB digital video input of a digital-compatible TV set (or the Y-PB-PR/RBG inputs of
some other video component).
Display Format Selector
Switches between 1080i (interlaced scanning), 720p (progressive scanning), 480p (progressive scanning),
and 480i (interlaced scanning) formats. (For HDTV broadcasts, 1080i is usually the best setting.)
S-VIDEO OUTPUT
If your TV or monitor has S-Video capability, use this jack along with the Audio/Video jacks to connect the
HDTV Digital Receiver to your receiver.