Directed Electronics DV2000 DVD Player User Manual


 
12
© 2002 Directed Electronics, Inc.
Basic Operation
Operations in this section are common for all
discs types (DVD, CD, Video CD, and Super-VCD).
TURNING THE PLAYER ON/OFF
Press POWER (20) on the remote control to turn
the player on, off, or to standby mode.
PLAY DISC
1. Press POWER (33) to turn on the player.
2. Holding the disc by its edge, slide it into
the disc slot with the label side up.
3. Press PLAY/PAUSE (7); the disc will begin
playing.
4. If the disc doesn't begin playback
automatically, press PLAY/PAUSE (7)
again.
STOP DISC
Press STOP (28) once to stop play. Press
PLAY/PAUSE (7) to resume playback.
REMOVE DISC
Press OPEN/CLOSE (1) to eject the disc for
removal.
PAUSE/RESUME PLAY
Press PLAY/PAUSE (7) to pause play. Press
PLAY/PAUSE (7) to resume play.
VOLUME CONTROL
The audio output volume can be controlled
using the volume buttons. Press either VOLUME
(15) button, and a volume bar graphic will
appear in the OSD indicating the volume level.
Press repeatedly or hold the volume button to
raise or lower the volume.
SLOW REWIND/SLOW FORWARD
Slow motion playback can be done by pressing
the R.SLOW (9) or F.SLOW (26) buttons once.
Press PLAY/PAUSE (7) to resume playback at
normal speed.
FAST REWIND/FAST FORWARD
Fast forward play or fast rewind play through
chapters/tracks can be done using the FR (10)
or FF (25) buttons during playback.
1. Press the right FF (25) button repeatedly
to fast forward play at 2x, 4x, 6x, and 8x
normal speed.
2. Press the left FR (10) button repeatedly to
fast rewind play at 2x, 4x, 6x, and 8x nor-
mal speed.
3. Press PLAY/PAUSE (7) to resume playback
at normal speed.
NOTE: Each time the button is pressed the rate of play
will appear in the OSD.
SKIP TRACKS/CHAPTERS
Moving forward or back a chapter or track at a
time can be done by using the FSKIP (27) or
RSKIP (8) buttons.
1. Press FSKIP (27) to advance to the next
chapter/track on the disc.
2. Press RSKIP (8) to return to the previous
chapter/track on the disc.