Filter
Top Products
© 2001 Directed Electronics, Inc.
11
ing location. Note the location of the
female 20-pin connector.
4. Position the TVM300 over the mounting
location and check alignment of the
antenna connector slot in the case, the
20-pin connector, and the two machine
screw mounts.
5. Carefully align the TVM300 to the 20-pin
connector and press down firmly until the
TVM300 mounting brackets align with the
machine screw mounts.
6. Secure the TVM300 to the circuit board
with the supplied machine screws.
7. Verify that the TVM300 is secured and rein-
stall the MCB1000 module cover.
8. Complete the installation/reinstallation of
the MCB1000. Verify all connections are
correct according to the instructions
9. Be sure to attach the TV antenna, then
test the system operation.
TV RECEPTION WARNING
Television reception in an automobile is con-
stantly affected due to vehicle movement
around obstructions and high-energy sources.
Location, weather, automobile construction, and
installation can all affect reception.
Possible areas of poor reception include:
■
Hospitals
■
Military bases
■
Airports
■
High power wires
■
Large buildings
■
Distance from transmitter