Filter
Top Products
4
© 2001 Directed Electronics, Inc.
Safety Instructions
Read this manual in its entirety before beginning
the installation. It has important information
about safety hazards during vehicle operation.
This system is designed and intended for instal-
lation by MECP certified installers. It requires
tools, equipment and product installation tech-
niques common to the Mobile Electronics indus-
try; therefore it is not recommended that the
consumer try to install this system. Installations
performed by unqualified persons could result in
damage to the vehicles electrical system. Please
consult with your authorized retailer to have
this system installed.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE INCLUDED HARDWARE.
DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY,
INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR
UNINTENDED USES OF THIS PRODUCT.
DO NOT MAKE MODIFICATIONS THAT WILL COMPROMISE ANY OF THE VEHICLES SAFETY
EQUIPMENT. MODIFYING OR CONNECTING TO WIRES FOR THE BRAKE OR LIGHTING SYSTEM
COULD CAUSE POTENTIALLY HAZARDOUS DRIVING SITUATIONS.
DO NOT MOUNT THIS OR ANY OTHER COMPONENT IN FRONT OF OR NEAR THE PASSENGER
AIR BAG. EXPLOSIVE AIR BAG DEPLOYMENT COULD THROW A COMPONENT TOWARD THE
PASSENGER CAUSING INJURY.