Filter
Top Products
18 118866
6. Write the number in step 2 from page 15 into the
blankinstep10below.
7. Press and hold the until both lights
turn on (it takes about five seconds).
8. Release and light will flash.
9. Press the
RECALL button.
10.Enter 0- .
11.Press the
MUTE button while watching light.
12.If the light flashes three times, go to
step 13. If light does not flash, go to step 7
and try again.
13.Press . Make sure your VCR tunes to the
channelinstep10.
14.Press the
MENU button. If you see the satellite
receiver
Menu screen, go to step 26. If not, go to
step 15.
15.Answer the questions in the Table 2. The
information you provide is what you will use to
teach your remote control to change the channel on
your VCR correctly.
SAT
TV
SAT
SAT
SAT
SAT