Filter
Top Products
118866 23
HOW TO CHECK THE TV CODES
You can find out what TV code is set up in your remote
control when you complete the following instructions.
H
OW TO CHECK THE VCR CODES
You can find out what VCR code is set up in your remote
control when you complete the following instructions.
1. Hold until lights turn on (it takes
about five seconds).
2. Release . light flashes.
3. Press . stays on.
4. Press the
MUTE button twice. flashes the
number for each digit of the device code, with a
pause between the groups of flashes. A quick flash
is zero.
Example: For the code 570, the TV POWER button
flashes five times, pauses, flashes seven times,
pauses, and flashes once quickly.
1. Hold until lights turn on (it takes
about five seconds).
2. Release . light flashes.
3. Press the
RECALL button. stays on.
4. Press the
MUTE button twice. flashes the
number for each digit of the device code, with a
pause between the groups of flashes. A quick flash
is zero.
Example: For the code 590, the TV POWER button
flashes five times, pauses, flashes nine times,
pauses, and flashes once quickly.
SAT
TV
TV
TV TV
TV
SAT
TV
TV
TV
TV