Filter
Top Products
Connections
89
Connecting to the TV
Standard-Definition Connections
1 Connect the receiver to the TV using one of the following:
• A
UDIO/VIDEO connection (RCA-type composite connection)
• S-V
IDEO and LEFT/RIGHT AUDIO
• TV SET OUT
2 If using the TV SET OUT connection, peel off the white sticker and attach it to the cable
close to where it connects to the TV S
ET OUT connection on the back of the receiver. The
sticker is in the front cover of this guide.
3 Turn on the TV and receiver to make sure you have a picture.
• If using the TV S
ET OUT connection, you’ll need to set your TV to either channel 3 or 4.
This output channel can be changed in the receiver’s menus by pressing MENU on
the remote control, selecting System Setup, Installation, then Modulator Setup.
The default output is channel 3.
• If using the S-V
IDEO or AUDIO/VIDEO connections, you’ll need to set your TV to a video
input or source. Refer to your TV’s user guide for more information.
4 Turn up the volume on the TV to make sure you have audio.