Dolby Laboratories DVD7016 DVD Player User Manual


 
33
Trouble Shooting Guide
Symptom
No power
No picture/sound
Interference or
scrolling
Black & White
picture
The player does not
start playback
Correction
• Check if the AC adapter of power plug is
connected securely.
• If powered with the battery, check if it is
exhausted.
• Make sure the connection is in good
condition; volume is not too low; audio
receiver or TV work normally; audio setting is
proper.
• Check if TV Type is correct PAL or NTSC by
the button P/N on the remote.
• Due to the effect of copy protection. Avoid
connecting to a VCR or TV/VCR combination.
• Adjust the vertical hold on your TV.
• The DVD+-RW you played should be
finalized, and not be an empty disc.
• Place the disc with the graphics side up and
make sure it's inside the guide.
• Make sure the disc is free from scratches &
fingerprints.
• Insert a playable disc. (Check the disc type
and color system).
• Do not playback a disc which region code is
different from that of of your player.
• Clean the disc.
• Cancel the parental lock function or change
the parental lock level. (The Pre-set password
is 3308.)
• Reset the player.