Filter
Top Products
12
Quick Starting Guide
6. Press ENTER or PLAY to
start playback.
In general, the DVD already
inserted into the player will start
reading automatically when
power is turned on.
The DVD player will
immediately start rendering the DVD program.
When you want to stop, press the STOP button, it
will return to the power-on logo.
To power off the unit, slide the power switch on
the left side of the unit to power it off.
The DVD player will automatically power off in
three minutes after entering screen saver mode.
POWER ON/OFF
11
Quick Starting Guide
1. Connecting to an External Power Source
Connect the power adapter (supplied with the player) to
the side input plug and to a wall outlet. Do not use any
other device otherwise specified by your dealer.
2. Open the protective cover
The cover opens to a maximum 135
o
only, so please do not try to open it
any further.
3. Press the open button on the left
to open the disc cover
4. Insert a DVD disc with label side facing upward.
Align the center of the DVD disc with the center of the
disc guide. Press gently down on the DVD to snap the
disc into place, then close the disc cover.
5. Slide the power switch on the left side of the unit
to power it on.
POWER ON/OFF