Dual DP295 DVD Player User Manual


 
16
Special FunctionsSpecial Functions
Special FunctionsSpecial Functions
Special Functions
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time .
1 Press SLEEP repeatedly to select a preset time.
- The selections are as follows (time in minutes)
15 30 45 60 90 120 OFF 15...
2 When you reach the desired length of time, stop
pressing the SLEEP button.
3 To check the remaining length of time after sleep
timer is activated.
Press SLEEP once.
4 To change the preset sleep timer
Press SLEEP again while the remaining sleep timer
is shown.
- The display will show the next sleep timer options.
5 To deactivate the sleep timer
Press SLEEP repeatedly until OFF is displayed,
or press the POWER button.
Special VCD / SVCD features
Playback Control (PBC)
PBC playback allows you to play Video CDs interac-
tively, following the menu on the TV screen.
- Press VCD/PBC key to select PBC ON or PBC
OFF.
When playing a disc with PBC function
1 If PBC OFF , press / the system will start
playback automatically.
2If PBC ON , the PBC menu (if available) will ap-
pear on the TV screen for selection. Use the num-
ber keypad (0~9) to enter your choice
Note
If PBC mode is switch on, TIME SEARCH and RE-
PEAT functions are not available.
Activating progressive scan
mode
The progressive-scan display presents 60 complete
frames per second, rather than the 30 frames per
second of interlaced scanning (ordinary normal TV
system). With nearly double the numbers of line,
progressive scan offers higher picture resolution and
eliminates bothersome motion artifacts those jagged
edges on moving objects.
To enjoy the full quality potential offered by
progressive scan feature, a progressive scan
TV is required.
1 In the STOP mode, press P-SCAN button and OK
button can to switch between the PROGRESSIVE
or INTERLACE.
2 All this action must complete in 5 seconds dura-
tion.
3 If witch success, the relevant message will display
on the TV screen.
Note
You need to switch the system off before change the
progressive scan mode.
Special MP3 features
MP3 meun
1 Press MENU to switch on the MP3-CD menu. The
menu appears on the TV screen.
2 To select a desired album, press / / / and
followed by OK or to confirm. The title menu
appears on the TV screen.
3 To select a desired title, press
/
/
/
and fol-
lowed by OK or to start playback.
4 You can also use the number keys (0~9) to enter
your choice.
If the MP3-CD menu is switched off
The system will start playback automatically.