Dynex DX-46L150A11 Flat Panel Television User Manual


 
Changing channel settings
17
DX-32L/37L/40L/46L
Playing TV audio only
You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press . The Setup menu
opens.
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately 5 to 10 seconds.
Notes:
Audio Only works only when the input source is TV and your TV is
receiving a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
Changing channel settings
Automatically scanning for channels
To auto scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to select Antenna or Cable, depending on your
setup.
4 Press or to highlight Auto Scan, then press ENTER. A
confirmation box opens.
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
MENU
Exit
Time
Closed Caption
Menu Settings
Input Label
Restore Default
Audio Channel
Parental Controls
SetupPicture
Select
Move
VGA Settings
Audio Only
On
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
Select
Move
MENU
Exit
Auto Scan
Favorites
Show/Hide
Channel No.
Channel Label
DTV Signal:
Audio SetupPicture Channel
2.1
Normal
WGBH-SD
TV Source
Antenna
Press ”ENTER” Key to Select
DX-32L-37L-46L150A11_10-0012.book Page 17 Thursday, January 14, 2010 8:30 AM